All in 1 Gaming Pro Sim Cockpit Review By The SRG

Barry Rowland of the Sim Racing Garage is back with a brand new review video. In a 2 part video series, Barry takes the All in 1 Gaming Pro Sim Cockpit through the detailed SRG review process. Part 1 covers the build of the unit.

The Pro Series racing simulator cockpit has a base length made from 90mm x 90mm commercial grade aluminum profiles. Connected to 90x90mm brackets, this cockpit has no flex with even the mightiest of wheelbases.

The framing architecture results in the same strength typically found 180x40mm side profile but with a smaller footprint.

Additional strength is provided by 4 x 1/2inch thick plates with 7 mounting points not only holding the frame together but also fully supports the frame along the entire perimeter.

Needless to say, the seat, wheel, and pedals depicted are for illustration purposes only and are not included.

For detailed pricing, check out the official All in 1 Gaming website.

---

Official Webpages – allin1gaming.com

---

All IN 1 GAMING COCKPIT PRO SPECIFICATIONS

ALL IN 1 PRO MODEL INCLUDES

• Pro Racing Sim Frame
• All connectors, plates, fasteners and bolts
• Step by Step assembly instructions with online assembly videos

CHOICE OF WHEEL MOUNT – INCLUDED

• Wheel Deck Mount Compatibility;
  • Logitech G25, G27, G29
  • Thrustmaster TX,T300, T500, T-GT, TS-P, TS-XW
  • Fanatec DD1, DD2, CSL Elite, Clubsport
  • Accuforce V1/V2
• Front Wheel Mount Compatibility;
  • Fanatec Clubsport
  • All Simucube 1, 2, Sport, Pro & Ultimate
  • SimMagic M10, SimMagic Alpha
  • VRS Direct Force Pro
  • MiGe 130st, Lenze MCS12
• Fanatec Podium Mount Compatibility;
  • Fanatec Pdium DD! & DD2

ALL IN 1 GAMING ESSENTIALS KIT – INCLUDED

• 2 x spare profiles, 45x45mm, 495mm in length
• 10 extra M8 bolts and T-Nuts
• Bondhus high grade Allen Key set
• M8 long Hex key, to easily assemble your rig.
• 13mm wrench
• 10 x tie wraps

PEDAL MOUNT – INCLUDED

• To mount your pedals;
  • 1 x 385mm (15.2inches) long 45X90MM aluminum profile
  • 1 x 385mm (15,2inches) long 45x45mm aluminum profile
  • 4 x corner brackets
• Pedals mount with bolts either upwards or downwards through 4 included corner brackets
• Pedal mount can be raised by 90mm (3.5inches) and rotated 360 degrees.
• Can easily be raised or lowered.
• Compatible with any pedals less than 385mm in width with 4 mounting positions

SIM FEET – INCLUDED

• 12MM thick plate is secured the frame underneath.
• 80mm Nylon Base comes with 2 mounting holes to secure the base to the floor if needed,
• Base made with anti-vibration rubber pad.
• Includes M12 x 55mm rod with flanged underneath resting bolt
• included M12 top bolt secures the unit in place

SIDE / SHIFTER MOUNT – OPTION

• 585mm (23.3inches) long 45X90MM aluminum profile
• 360mm (14.2inches) high 45x45mm support for height adjustement
• Can easily be raised or lowered.
• Can be mounted on the right or left side.
• Option for Shifter Mount Plate; Compatible with: Logitech, Thrustmaster, Fanatec

PRO VERSION SIDE / SHIFTER MOUNT – OPTION

• for shifter / brake models that include top mounting M8 or M6 bolts into an M8 or M8 t-nut
• includes 4 x M8 t-nuts and 4 x M6 t-nuts
• 585mm (23.3inches) long 45X90MM aluminum profile
• 360mm (14.2inches) high 45x45mm support for height adjustment
• Can easily be raised or lowered.
• Can be mounted on the right or left side.
• 2 x 180mm (7.1inch) crossbars secured by 4 corner brackets the 45×90 long profile
• extra corner bracket to secure the 360mm height profile

PRO MODEL SIM DIMENSIONS

• Frame Length: 1450mm / 56.7 inches
• Frame Width: 675mm / 26.7 inches
• Frame Height 720mm / 28.7 inches
• Sim Feet: Adds 55mm (2.2 inches) to the height